• <samp id="sqj9n"><form id="sqj9n"><bdo id="sqj9n"></bdo></form></samp>
    <track id="sqj9n"><ruby id="sqj9n"><menu id="sqj9n"></menu></ruby></track><pre id="sqj9n"><label id="sqj9n"></label></pre>

    1. <acronym id="sqj9n"><strong id="sqj9n"><address id="sqj9n"></address></strong></acronym>

      Lu'An Jietonda New Material Co.,Ltd.

      PRODUCTS

      Curing agents

      Product name Application Processing & Use level Characteristics
      K7101 Epoxy hardener/curing accelerator □ Incorporated into formula before extrusion
      □ As curing agent,e the use level is 2-4phr on epoxy resin
      ■ Excellent flow and low usage
      ■ Used as curing agent, curing @120℃/30min
      ■ Used as accelerator, curing @240℃/30s
      K7104 Epoxy hardener □ Incorporated into formula before extrusion
      □ As sole curative the use level is 3-5phr on epoxy resin
      ■ Curing @ 140℃/15min or 240℃/30s
      ■ Applied for thick film coatings or FBE coatings
      ■ Good mechanical properties
      ■ Good chemical resistance
      K7108 Epoxy hardener □ Incorporated into formula before extrusion
      □ As sole curative the use level is 4-6phr on epoxy resin
      ■ Curing @ 150℃/10min or 240℃/2min
      ■ Applied for thin film decorative coatings or functional epoxy powder coatings
      ■ Good film appearance and mechanical strength
      SA31 Epoxy hardener/curing accelerator □ Incorporated into formula before extrusion
      □ As accelerator, use level is 0.1-0.5% on total formula
      ■ For functional or decorative powder coatings
      ■ Curing @ 140℃/30min
      SA2830 Epoxy hardener □ Incorporated into formula before extrusion
      □ 3.5-4.5phr on epoxy resin
      ■ For functional or decorative powder coatings
      ■ Curing @ 180℃/15min
      SA2831 Epoxy hardener (accelerated DICY) □ Incorporated into formula before extrusion
      □ 4-5phr on epoxy resin
      ■ For functional or decorative powder coatings
      ■ Curing @ 160℃/12min or 200℃/5min
      SA3120 β-HAA hardener □ Incorporated into formula before extrusion
      □ Hydroxyl equivalent value is about 84
      ■ Eco-friendly,Low-toxicity,anti-yellowing
      ■ Exterior application, Substitute of TGIC
      K7150 Blocked polyisocyanate curing agent for PU powder coatings It is recommended to cure with hydroxyl polymer in equivalent amount (13:87 for polyester with hydroxyl value of 30; 20:80 for polyester with hydroxyl value of 50) ? Extremely high crosslink density , excellent surface hardness and chemical resistance for coating . ? Excellent leveling and smoothness. ? Excellent weather resistance.
      K7152 Blocked polyisocyanate curing agent for powder coatings It is recommended to cure with hydroxyl polymer in equivalent amount 13:87 for polyester with hydroxyl value of 30; 20:80 for polyester with hydroxyl value of 50 ? Extremely high crosslink density , excellent surface hardness and chemical resistance for coating . ? Excellent leveling and smoothness. ? Excellent weather resistance and anti yellowing performance.

      CONTACT US

      Contact us

      Order

      HOTLINE:

      +86-564-3711165
      +86-13966241417
       

      Mobile version

      Search

      Add: 15 Li Dun, North Outskirts of Luan City, Anhui, P, R, China  P.C.:237158
      Tel: +86-564-3711165 , +86-564-3711777
      Fax: +86-564-3711167 E-mail: jietonda@jietondachem.com

      Copyright(C)2019, Lu'An Jietonda New Material Co.,Ltd. All Rights Reserved. Supported by ChinaChemNet ChemNet Toocle Copyright Notice 備案序號:皖ICP備11004581號

      日本Aⅴ免费一区二区三区_东方亚洲欧a∨人在线观看_东京热av中文字幕av专区_中文字幕av无码免费在线